Light My Bricks kits are dedicated LED lighting systems engineered specifically for LEGO® sets. Each kit uses 0.2mm ribbon-thin flat cables designed to fit between LEGO® studs and plates without gaps, and reverse polarity connectors that plug in at any orientation.
How are Light My Bricks light kits powered?
Light My Bricks light kits run on a low-voltage 5V, 2.4A USB input. For continuous display, connect the kit to a Light My Bricks USB Wall Adapter, which powers up to 400 LEDs in total across its two USB ports, or to a Light My Bricks USB Power Bank. For mobile displays, the Flux Pack uses 6x AAA batteries and has a 4-stage dimmer for medium-sized kits, and the compact Power Brick 2.0 uses 2x CR2032 batteries to power up to six LEDs when combined with docks. Light My Bricks recommends only its own power sources. Other adapters, including higher-voltage ones, are used at the customer's own risk and are not covered by warranty.
How long do Light My Bricks LED lights last?
Light My Bricks kits run continuously when connected to a Light My Bricks USB Wall Adapter. The LEDs have an operational lifespan of over 50,000 hours and run on a low-voltage 5V input. To maximize LED lifespan, Light My Bricks recommends giving the lights a break, such as turning them off during the day or using a scheduled window. On battery power, the Flux Pack delivers over 7 hours of runtime for a medium-sized kit, and the Light My Bricks USB Power Bank (3350 mAh) delivers up to 5 to 6 hours for a larger set. Runtime depends on the power source and the number of lights connected.
Why are Light My Bricks light kits more expensive than generic LED options?
Light My Bricks kits cost more than generic LED options because each kit is a complete lighting system researched and designed for one specific LEGO® set. Each kit uses 0.2mm ribbon-thin flat cables that tuck inside brick channels, brick-compatible components that clutch onto LEGO® studs with no glue or adhesive, built-in smart fuse protection, components certified to CE, UKCA, FCC, RCM and RoHS standards and set-specific light effects, with 3D instructions written for that build. Our manufacturers are also audited to Sedex and BSCI ethical trade standards.
Is it better to install a Light My Bricks kit during or after building your set?
Light My Bricks kits can be installed during or after the build, and the finished result is identical. Light As You Build suits a set that has not been started: follow the Light My Bricks 3D guide from the first brick and each lighting component is added at the point it fits most cleanly, so the set is fully lit when the last brick goes on. Light After Build is for completed sets, with no time limit, including sets built years ago. The guide shows which large sections to separate and in what order.
Are Light My Bricks light kits safe to leave turned on for long periods?
Light My Bricks light kits are safe for continuous display. They run on low-voltage 5V power with built-in smart fuse protection, so they can stay on when powered by a recommended Light My Bricks 5V 2.4A USB source. To maximize LED lifespan, Light My Bricks recommends giving the lights a break, such as turning them off during the day or using a scheduled window.
Can I connect multiple Light My Bricks light kits together?
Yes, Light My Bricks light kits can be chained and powered together. By using Light My Bricks expansion boards and connecting cables, you can run multiple kits from a single power source, provided the total power draw remains within the 5V, 2.4A USB limit (up to 400 total LEDs on a Light My Bricks USB Wall Adapter).
Do Light My Bricks light kits damage or permanently alter LEGO® bricks?
No, Light My Bricks light kits are completely non-destructive and fully reversible. Components clutch onto LEGO® studs with no glue or adhesive, so nothing can damage or discolor the bricks. The 0.2mm ribbon-thin flat cables run inside the brick channels without forcing, modifying, or gluing any original pieces, and removing the lighting leaves the set exactly as it was.
What happens if a component in a Light My Bricks light kit stops working?
Light My Bricks components are backed by a 2-year warranty when used with official Light My Bricks power sources. Individual replacement components, cables, and lights can also be purchased separately to service or update your setup.
Do you need electronics or soldering experience to install Light My Bricks light kits?
No electronics or soldering experience is required to use Light My Bricks with your LEGO® set. Every kit comes with clear, step-by-step 3D digital instructions that guide you through every stage of the installation process.
Can I customize or create my own DIY lighting setup with Light My Bricks components?
Yes, Light My Bricks offers a wide range of individual DIY lighting components, including Astro Lights, Meteor Lights, expansion boards, effect boards, and connecting cables. These modular parts allow you to custom-light any MOC (My Own Creation) or non-standard LEGO® build.
Do Light My Bricks light kits come with a remote control?
Light My Bricks light kits do not include a remote control by default, but all kits are compatible with the Light My Bricks Remote Control Pack (sold separately). The Remote Control Pack allows you to turn lights on and off remotely and adjust brightness across five dimming levels.
Are Light My Bricks products officially affiliated with the LEGO Group?
Designed in collaboration with the LEGO® Group, Light My Bricks is an independent aftermarket company specializing in LED lighting systems designed for LEGO® sets. Light My Bricks products are not sponsored, authorized, or endorsed by the LEGO Group, though all components are engineered to work with official LEGO® bricks.
Why are my Light My Bricks lights not working?
If a Light My Bricks kit is not lighting, check three things in order. First, the power source: use a Light My Bricks USB Wall Adapter or USB Power Bank rated 5V, 2.4A, check batteries are charged and correctly oriented, and check USB cables are fully seated. Second, the connections: flat flex connectors must click firmly into place, so press every connection until it seats. Third, if the build uses Flux Touch Plates, check that the cables from both sections run in the same direction. Always turn the power off before disconnecting or reconnecting anything.
Why are my Light My Bricks lights dim?
Dim lights usually point to an underpowered source or a partial short. Switch to a Light My Bricks USB Wall Adapter rated 5V, 2.4A, as third-party adapters can cause dimming and are not covered by warranty. If dimming continues, power off, disconnect the belt or cable feeding the affected section, then power on to test. Reconnect components one at a time, powering off between each, until the dimming returns. The last component reconnected is the fault.
What are Flux Touch Plates, and how many do I need?
Flux Touch Plates are a Light My Bricks wireless power connector that replaces a connecting cable or belt between two sections of a build. Power transfers when the plates make contact. All Light My Bricks modular building kits include them. Each connection point needs one set of Plate A and Plate B, and a floor with three separate circuits needs three sets. The plates add no power restriction. If they are not lighting, the most common cause is cable direction: the cables from both sections must run in the same direction.
Is Light My Bricks lighting safe for my LEGO® set?
Yes. Every Light My Bricks kit has built-in smart fuse protection, so if something goes wrong the fuse blows, not your build. The components are certified to CE, UKCA, FCC, RCM and RoHS standards, tested to global safety standards, and run on a low-voltage 5V input.
What does the Light My Bricks warranty cover?
Everything Light My Bricks sells, including kits and DIY components, is covered by a 2 year warranty. Use of a non-Light My Bricks power source, including higher-voltage adapters, is not covered. See the Warranty & Returns Policy for full terms.
What if there is no Light My Bricks kit for my LEGO® set?
Yes. Our manufacturers are audited to Sedex and BSCI ethical trade standards, which cover fair treatment of workers and safe factory conditions. Our packaging is FSC certified, which means responsibly sourced paper, and our electronics follow the EU WEEE directive for responsible disposal. Audited factories cost more to run, which is part of why our kits cost what they do.
Are these products safe for my child?
Light My Bricks light kits are designed for adult LEGO® fans and collectors, and most of our kits are made for LEGO® sets rated 16+. We don't recommend them for young children: the kits contain very small components and fine cabling that can be a choking hazard and aren't suited to little hands. An older child is welcome to take part in the build alongside a supervising adult, but the kits are intended as a display upgrade for adult builders rather than a children's product.
Can I purchase individual lights and light my own creation or add more lights to a light kit I purchased?
Yes, we also cater to DIY LEGO® lighting fans! We stock a wide range of components, you can check them out in our Light Components section!
Can I return a product?
We understand sometimes things happen and you may need to make a return. As long as the item is unopened and in it's original condition, we accept returns within 30 days of purchase. Head to our returns page to find out more!
Do the lights generate heat?
All of our lights are LED lights and do not draw any form of heat. Our products are designed to run continuously.
Do you ship to countries outside of Australia?
Yes! Although we are based in Australia, we have warehouses in the US, EU, UK & CA which enables us to ship to customers all over the world using a variety of different international couriers to ensure your product is received quickly and safely!
North American Store - www.lightmybricks.com
European Store - www.lightmybricks.eu
United Kingdom Store - www.lightmybricks.co.uk
Canadian Store - www.lightmybricks.ca
Does Light My Bricks sell gift cards?
Yes we do! You can purchase the gift card for the value of: $30, $50, $100 or $200 AUD. Our gift cards are digital and will be delivered electronically via email.
How are the lights powered?
Light My Bricks offers multiple powering options. We recommend our lights be powered by our USB Power Bank or Wall Adaptor to provide long running power.
How do I get notified when new products are released?
We're always releasing products on a frequent basis, but the best way to stay informed when new products release is to subscribe to our email newsletter or follow us on social media: • Facebook • Instagram • YouTube • X
How long do the lights run for when connected to different power sources?
The run time of our lights depends on what power source is connected and the number of lights connected. If using our USB Power Bank to power a light kit, the more lights connected, the more power they draw from the Power Bank, therefore the run time will be lower.
Compared to if you have your light kit connected to our USB Wall Adapter and plugged into a wall socket, the lights will continue to run until the USB Wall Adapter is switched off.
How much is shipping?
In Australia we offer free shipping over $100 AUD. Please see our shipping page for all other shipping rates in AU and for our Asia & New Zealand customers.
I just purchased my first light kit, what do I do now?
Head on over to our Learning Centre to get hints, tips and articles on all things LEGO® lighting!
Is Light My Bricks associated with LEGO®?
Light My Bricks initially collaborated with LEGO® through the LEGO Lead User Lab to create lighting products that complement LEGO® bricks and sets. After the conclusion of the LEGO Lead User Lab, we chose to continue developing our products independently.
Our 2.0 LEGO® lighting components were designed with insights from this collaboration and are made to fit LEGO®-compatible bricks and studs perfectly. However, we are not officially affiliated with LEGO®.
What payment options do you accept?
Apple Pay, Shop Pay, Afterpay, Mastercard, Paypal and Visa.
What voltage do the lights run on?
All of our lighting products run on 5 volts.
Where do you ship to?
From our Australian warehouse we ship to Asia, New Zealand and Australia wide.
Where is Light My Bricks™ based?
We are an Australian company based in Melbourne, Victoria.
Where is my order shipped from?
Your order will be dispatched from our warehouse located in Melbourne, Australia.